IT'S GETTING HOT IN HERE
I’m a home expert & here’s the step-by-step guide of bleeding your radiators – & how it will save you loads this winter
According to the expert, the task is so simple you don't even need to call a plumber to fix the issue
DO you feel freezing cold and are shivering even though the radiators are full on?
Well, according to experts, there is a reason your radiators aren't working as effectively as they should - and it's also causing your money to go down the drain.
2
2
As we're approaching the gloomy winter months, many households across the nation are finally switching the heating on to keep toasty - and now, one whizz, from Feature Radiators, has advised Brits to steer clear from a crucial mistake that's costing you a fortune - not bleeding your radiators.
According to the pro, it's vital to do so every once in a while, as it will make the system more efficient - and slash energy bills in turn, too.
When to bleed a radiator?
It is relatively easy to tell when a radiator needs bleeding, as the top section will remain a lot cooler than the bottom section.
In some cases, experts at added, the entire radiator will stay cold when the heating system is turned on.
READ MORE ON HOMES
This usually happens because trapped air displaces the hot water that normally heats the radiator.
To tackle this and resolve the issue, you need to release the trapped air - the bleeding process - and that will make the hot water to flow properly.
How to bleed your radiator?
According to the pros, bleeding does not require a plumber to be called, and it's something anyone can do.
To perform this simple task, the experts demonstrated in , you will ideally need a bleed key - however, if you don't have one, a flat-ended screwdriver works just fine too.
Most read in Fabulous
They said: "What we're looking for is getting the air out, which will come out like 'tsss', and we want a steady stream of water.''
To ensure there's no puddle left on your floors, make sure to grab a mug or a tiny bowl to catch all the water.
Step-by-step guide
Before you begin, ensure that your central heating is switched off, as having it on while bleeding radiators is very dangerous.
You should see a square 'bleed screw' at the top of the radiator - this is the part you’ll need to turn in order to release the air and water trapped in the system.
Use the key - or the screwdriver - to turn the bleed screw anti-clockwise; if needed, grab a cloth too to help with gripping.
You should hear a hissing sound as the air escapes.
When the hissing stops and there’s a steady stream of water, the radiator is fully bled.
Use the key to tighten the bleed screw - however, don't go too tight, as this mistake could damage the valve.
Once done, simply wipe off any water to avoid rust, and switch the heating back on - yes, it's really that easy.
READ MORE SUN STORIES
The guru added: "Don't be cold this winter - learn how to bleed your radiator.
"This is an important way to keep your heating efficient to save you money and keep you warm."
Topics